Nka nka
Ihe nke Metal Parts	components na kọntaktị na ọkara	CF8/CF3M (304/316L) Nkedo/ịgha	Akuko nyocha ihe dị
	components adịghị na kọntaktị na-ajụ	304 (1.4301)
Ihe nke Sealings	Ọkọlọtọ	Ụlọ PTFE
	Nhọrọ	Bubata 3M	Soro ihe ndị bụ isi chọrọ nke FDA177.2600/3A/UPS nri, mmiri ọñụnụ na microorganisms.
Nrụgide	Nrụgide arụ ọrụ	0-16 mmanya
	Jikwaa nrụgide ikuku	3-8 mmanya
Okpomọkụ	Okpomọkụ na-arụ ọrụ	PTFE: -20 ~ + 130 ℃ 3M: -25~+150℃
	Okpomọkụ StIlization	150 ℃ (Max 20 nkeji)
Ọgwụgwọ elu	Ime n'elu ọgwụgwọ	Ra≥0.4-0.8μm
	Ọgwụgwọ elu dị n'èzí	Ra≥0.8-1.6μm
Njikọ	Dayameta ọkpọkọ ịgbado ọkụ	DIN11850 -2 na 11850-1 / SMS / 3A / ISO usoro wdg
	Ọnọdụ njikọ: Weld, Clamp, M / F eri, Flange wdg.
Njikwa pneumatic	Ihe njikwa pneumatic na nkwado nkwado

 

 

Ụdị 2

 

Ngwa

Ụdị valvụ bọọlụ a bụ valvụ dị ọcha maka njikwa nnyefe ihe.A na-ejikarị eme ihe na nri, nhazi ihe ọṅụṅụ, yana na ụlọ ọrụ ọgwụ na kemịkal.

Ụkpụrụ ọrụ

Site n'ịtụgharị aka 360º, a na-eme ka oghere dị n'ụzọ ziri ezi nwere oghere 360 ​​Celsius imeghe ma ọ bụ mechie valvụ iji chịkwaa ọsọ nke ọkara.

Ụdị njikọ:

3A/SMS/ISO/ID/BS

Nha	d1	d2	D	L	K	H	S
3/4"	17	17	50.5	105	63	44	126
1”	22	22	50.5	120	68	53	136
1-1/4”	29	29	50.5	130	71	54	138
1-1/2”	35	35	50.5	155	80	65	156
2”	47.5	42	64	168	90	72.5	170
2-1/2”	59	54	77.5	195	102	86	194
3”	72	67	91	215	118	99	220
4”	100	94	119	260	142	123.5	264

 

Valve bọọlụ Sanitary kwụ ọtọ

Nka nka

Ihe akara akara niile zutere FDA177.2600

Okpomọkụ na-arụ ọrụ: -20 ~ 135 ℃ (EPDM/PTFE)

Okpomọkụ igba ogwu: 150 ℃ (max.20min)

Nrụgide ọrụ: 1.6Mpa (16bar)

Ọkara: Mmiri, Mmanya, Mmiri ara ehi, ụlọ ahịa ọgwụ wdg

Usoro njikọ: 3A/DIN/SMS/ISO (welding, mwekota, eri, flange)

 

Nha	d1	d2	K	H	S	L
1/2"	9.5	12.7	25.4	40	95	95
3/4"	15.9	19.1	50.5	40	100	145
1”	22.4	25.4	50.5	48	120	155
1-1/4”	28	31.8	50.5	52	130	155
1-1/2”	34.9	38.1	50.5	60	140	155
2”	47.6	50.8	64	68	160	165
2-1/2”	59.5	63.5	77.5	80	180	175
3”	72.2	76.2	91	86	210	190
3-1/2”	85	89	106	94	230	190
4”	97.6	101.6	119	115	260	245

 

Sanitary Three Way Ball Valve

Ngwa:

A na-ejikarị valvụ bọọlụ ụzọ atọ eme ihe maka igbochi, kesaa na ịgbanwe ntụgharị ntụgharị nke ọkara na pipeline.Bọọlụ bọọlụ bụ ụdị valvụ ọhụrụ a na-ejikarị eme ihe n'afọ ndị na-adịbeghị anya, nke a na-ejikarị eme ihe na nri na ihe ọṅụṅụ, ọgwụ, mmanụ ala, kemịkalụ, nhazi ndu na ụlọ ọrụ ndị ọzọ.

Nka nka

Asambodo EN10204 3.1B

N'iji ihe nchichi a na-ebubata, ihe mkpuchi niile na-akwado FDA 177.2600

Okpomọkụ na-arụ ọrụ: -20 ~ 135 ℃ (EPDM/PTFE)

Okpomọkụ igba ogwu: 150 ℃ (max.20min)

Nrụgide ọrụ: 1.6Mpa (16bar)

Ọkara: Mmiri, Mmanya, Mmiri ara ehi, ụlọ ahịa ọgwụ, wdg

Usoro njikọ: 3A/DIN/SMS/ISO (Welding, Clamp, Thread)

Isi Akụkụ na Akụrụngwa

Ahụ valvụ pneumaticCF3/CF8M	Isi ValveCF3/CF8M	Okpu304/316L	ochePTFE	Bọọlụ L/T304/316L	Isi304/316L	Bolt304	Jikwaa304

 

DIN akụkụ

 

SIZE	Dn	Rd	A	E	F
DN25	25	Rd58x1/6"	140	50	146
DN32	31	Rd65x1/6"	156	64	185
DN40	37	Rd78x1/6"	172	68	185
DN50	49	Rd95x1/6"	182	95	243
DNA65	66	Rd110x1/4"	196	104	243
DN80	81	Rd130x1/4"	256	122	273
DN100	100	Rd160x1/4"	286	173	273

 

Ụdị SMS

 

SIZE	Dn	Rd	A	E	F
1”	22.4	Rd40x1/6"	140	64	185
1-1/4”	28.8	Rd48x1/6"	156	64	185
1-1/2”	35.1	Rd60x1/6"	165	68	185
2”	47.8	Rd70x1/6"	182	73	205
2-1/2”	59.5	Rd85x1/6"	196	95	243
3”	72.2	Rd98x1/6"	225	104	243
4”	97.6	Rd128x1/4"	286	173	273

 

Sanitary Butterfly-Ụdị bọọlụ Valve

 

Ngwa:

QF7 nru ububa valvụ bụ ụdị valvụ nke nwere ike ịwụnye ngwa ngwa yana nhicha dị mfe.Ọ bụ nhọrọ kacha mma maka ijikwa mgbasa ozi viscous ma ọ bụ particulate na ụlọ ọrụ ịdị ọcha.A na-ejikarị ya na nri, nhazi ihe ọṅụṅụ na ụlọ ọrụ ọgwụ na kemịkal.

Nka nka

Asambodo EN10204 3.1B

N'iji ihe nchichi a na-ebubata, ihe mkpuchi niile na-akwado FDA 177.2600

Okpomọkụ na-arụ ọrụ: -20 ~ 135 ℃ (EPDM/PTFE)

Okpomọkụ igba ogwu: 150 ℃ (max.20min)

Nrụgide ọrụ: 1.0Mpa (10bar)

Ọkara: Mmiri, ihe ọṅụṅụ, mmiri ara ehi, ụlọ ahịa ọgwụ, wdg

Usoro njikọ: 3A/DIN/SMS/ISO (Welding, Clamp, Thread)

 

Ụkpụrụ ọrụ

Ụdị valvụ a nwere ike iji ọkụ eletrik ma ọ bụ pneumatic actuators rụọ ọrụ nke ọma, ma ọ bụ jiri aka na-achịkwa ya.

Ndị na-arụ ọrụ eletriki ma ọ bụ pneumatic na-atụgharị mmegharị axial nke piston ka ọ bụrụ ntụgharị 90 ° nke ogwe aka valve imeghe ma ọ bụ mechie, na ijikwa ma mepee / mechie mmiri na pipeline.Ngalaba pneumatic actuator dị n'ụkpụrụ atọ: na-emeghekarị (NO), na-emechikarị (NC), na pneumatic/pneumatic (A/A).

Ihe njikwa ọtụtụ maka ọrụ ntuziaka duckbill nwere ike ịgbachi valvụ ahụ n'ụzọ 12 nke mepere emepe ma ọ bụ mechiri emechi site n'ịgbanwe ọnọdụ 15 Celsius, nke nwere ike nweta ebumnuche nke ịchịkwa usoro mgbasa ozi.

Ụdị akwụkwọ ntuziaka nke ụdị lever na-eji ígwè eme ihe na-emechi valvụ ahụ n'ọnọdụ 4 ya nke oghere ma ọ bụ mechie site na nhazi 4 multi-functioning, ma nwetakwa nzube nke ịchịkwa ọsọ nke usoro.

Nka nka
Ihe nke Metal Parts	components na kọntaktị na ọkara	304L/316L (1.4307/1.4404) Agbaghara
	components adịghị na kọntaktị na-ajụ	304 (1.4301)
	Akwụkwọ EN10204 3.1B dị
Ihe nke akara	Ọkọlọtọ	PTFE/EPDM
	Nhọrọ	FPM/PTFE, HNBR/PTFE, SILICONE/PTFE
	Ihe mkpuchi niile zutere FDA177.2600
Nrụgide	Nrụgide arụ ọrụ	10 mmanya
Okpomọkụ	Okpomọkụ na-arụ ọrụ	EPDM/PTFE: -20~+135℃
	Okpomọkụ igba ogwu	150 ℃ (Max 20 nkeji)
Ọgwụgwọ elu	Ime n'elu ọgwụgwọ	Ra ≤0.8μm
	Ọgwụgwọ elu dị n'èzí	Oke 1.6μm
Njikọ	Ọkọlọtọ	DIN11850 usoro 2
		Weld End: INCH ọkọlọtọ ọkọlọtọ
	Ọnọdụ njikọ: Weld, Clamp, eri, Flange wdg.

 

DN	d	D	L1	L	H	H1	H2	W	W1	B
DN25	26	90	40	80	70	230	160	120.5	AT63	Rd52x1/6"
DN40	38	100	50	100	76	235	180	120.5	AT75	Rd65x1/6"
DN50	50	116	52.5	105	95	270	195	156.3	AT83	Rd78x1/6"
DNA65	66	142	62.5	125	108	-	220	156.3	AT92	Rd95x1/6"
DN80	81	172	70	140	125	-	260	220	AT105	Rd110x1/4"
DN100	100	200	85	170	155	-	300	220	AT125	Rd130x1/4"

valvụ bọọlụ na-adịghị ejide ihe dị ọcha

Ngwa:

Igwe valvụ bọọlụ na-enweghị njide bụ ihe eji eme oche bọọlụ na-emetụta ya, nke na-edozi nsogbu nke njigide mmiri dị na valvụ nke valvụ bọọlụ.valvụ bọọlụ dabara adaba maka injinia biopharmaceutical

.

Nha	d	D	L	H	S
3/4"	16	50.5	100	65	105
1”	22.4	50.5	110	70	105
1-1/4”	28.5	50.5	120	80	130
1-1/2”	35.1	50.5	140	80	150
2”	47.8	64	164	85	160
2-1/4”	53	77.5	170	110	180
2-1/2”	59.5	77.5	180	110	180
3”	72	91	190	130	200
3-1/2”	85	106	200	140	210
4”	98	119	220	155	230

Atụmatụ imewe

Usoro njikọ: Mwekota / eri / ịgbado ọkụ / flange)

Dị mfe ma dị mfe ịwụnye

Ike arụ ọrụ dị ala

Washer na-akwado FDA177.2600

Welding eri ụdị nke mwekota: DIN, SMS, ISO, IDF, BPE, RJT

Njikọ ọ bụla nwere ike dochie valvụ ahụ na-enweghị ịgbanwe ogologo ogologo nke valvụ ahụ.

Njirimara ngwaahịa

1. Nrụpụta ihe mgbochi na-efe efe
2. Valve ahụ na njikọ bonnet nwere nhazi ọkwa ọkwa.
3. Mgbasa zuru oke
4. Nhazi anaghị alaghachi azụ
5. Ngwaọrụ akwụ ụgwọ akpaghị aka
6. Ngwaọrụ mechie

Ụkpụrụ ọrụ

Site n'ịtụgharị aka 90º, 360° na-eji oghere gafere bọọlụ na-emepe ma ọ bụ mechie valvụ ahụ, iji chịkwaa ọsọ nke ọkara.

Ọrụ Torque (NM)

Nha	1-3/4”	1”	1-1/4”	1-1/2”	2”	2-1/2”	3”	3-1/2”	4”
Torque	6	10	12	14	20	40	75	90	110

Cheta na: onye na-eme ihe ahụ tụrụ aro ka iwelie oke nchekwa nke 20%

Sanitary 3PC Butt Weld Ball Valve

Ngwa

Igwe valvụ bọọlụ nke nwere akụkụ atọ bụ valvụ bọọlụ ịdị ọcha nke dị mfe ịwụnye, ịkwasa na dị ọcha.A na-eji ya eme njem gas, mmiri mmiri na ihe ndị ọzọ.Ngwa ngwa nke valvụ a gụnyere nri, ihe ọṅụṅụ, ụlọ ọrụ ọgwụ na kemịkal.

Ngwunye valvụ zuru oke na ihe niile jikọtara ọnụ na-ebelata nguzogide mmiri na ihe fọdụrụnụ, na-eme ka valvụ a bụrụ nhọrọ kacha mma maka ijikwa akụrụngwa na-ekpo ọkụ ma ọ bụ mmiri viscous.

Nka nka

Nhazi valvụ bọọlụ na-agụnye ihe niile, enweghị njigide, ịdị ọcha dị elu, zute CIP, SIP sterilization and cleans chọrọ, oke okpomọkụ na-eguzogide 150 ℃, nrụgide 25bar, ntinye akara nkwụghachi ụgwọ akpaaka, na obere torque, ogologo ndụ ndụ na ihe ndị ọzọ.Ngbanwe nkịtị karịa 100,000 ugboro.Enwere ike ịhazi ya na ndị na-ahụ maka njikwa dị iche iche, dị ka eletriki, pneumatic kwụ ọtọ, igwe anaghị agba nchara atọ akụkụ pneumatic, aka aka, yana nwekwara ike ịkwado nkeji njikwa, onye na-achọpụta ihe, sensọ ọnọdụ, wdg, yana sistemụ njikwa akpaka.

Ọgwụgwọ elu

A na-eji igwe CNC eme ihe niile, 0.8rn, ruo RA0.4cm, eletrọ na-egbu maramara ruo 0.25cm.

Nha	d	D	L	H	S
1/2"	9.4	12.7	90	60	132
3/4"	16	19	104	64.5	132
1”	22.1	25.4	115	69	165
1-1/4”	28.5	31.8	125	75	170
1-1/2”	34.9	38.1	140	89	194
2”	47.5	50.8	156	97	194
2-1/2”	59.5	63.5	198	127	252
3”	72.2	76.2	230	135	252
4”	97.6	101.6	242	159	332
5”	125	145	290	210	350

                             

Nha	d	D	L	H	S
1/2"	9.4	25.5	90	60	132
3/4"	16	50.5	104	64.5	132
1”	22.1	50.5	115	69	165
1-1/4”	28.5	50.5	125	75	170
1-1/2”	35	50.5	140	89	194
2”	47.5	64	156	97	194
2-1/2”	59.5	77.5	198	127	252
3”	72.2	91	230	135	252
4”	97.6	119	242	159	332
5”	125	145	290	210	350

3PC Pneumatic Ball Valve gụnyere niile

Ụkpụrụ imewe

Enwere ike ịnye ndị ahịa usoro valvụ ọkọlọtọ dị iche iche, ya bụ maka usoro ọkọlọtọ DIN, usoro ọkọlọtọ 3A, usoro ọkọlọtọ SMS, usoro ọkọlọtọ ISO / IDF, usoro ọkọlọtọ BS / RJT, ASME / BPE na usoro ọkọlọtọ ndị ọzọ.

Ihe mejupụtara valvụ bọọlụ na-agụnyekarị: bọọlụ nwere oghere, akụkụ valvụ, ogwe valvụ na akara akara.

Nkọwa usoro valvụ dị ugbu a bụ: welded, mwekota na eri

Enwere ike itinye ndị na-arụ ọrụ pneumatic n'ụzọ abụọ ma ọ bụ ụzọ atọ dị ala ma ọ bụ valvụ bọọlụ dị elu nke kwekọrọ na ọkọlọtọ ISO5211.Enwere ike ijikwa valvụ bọọlụ dị ala nke nwere ihe nrụnye ihe nkwado

Ihe onwunwe: 316, ASTM-CF8M A351

oche: PTFE

Nha	d	D	L	Ihe Nlereanya Silinder
1/2"	9.4	25.5	90	AT40
3/4"	16	50.5	104	AT50
1”	22.1	50.5	115	AT63
1-1/4”	28.5	50.5	125	AT63
1-1/2”	34.9	50.5	140	AT75
2”	47.5	64	156	AT83
2-1/2”	59.5	77.5	198	AT92
3”	72.2	91	230	AT125
4”	97.6	119	242	AT140

 

Iberibe atọ site na valvụ bọọlụ

Ọkọlọtọ imewe:

Akụkụ mmeghe na mmechi nke valvụ bọọlụ nke atọ nke na-agụnye bọlbụ, na bọl ahụ na-atụgharị gburugburu axis nke valvụ ahụ iji nweta nzube nke imeghe na imechi.A na-eji valvụ bọọlụ nke nwere akụkụ atọ na-ebu ngwa ngwa na-ebufe ihe niile iji belata mgbasa nke ọkara na pipeline.

Isi ihe dị na valvụ bọọlụ a bụ akara a pụrụ ịdabere na ya, nhazi kọmpat, ọrụ dị mfe na mmezi.Tụkwasị na nke ahụ, valvụ bọlbụ ịdị ọcha nwere obere nguzogide mmiri, yana ọnụọgụ nguzogide ya hà nhata n'ogologo nke akụkụ ọkpọkọ.

valvụ bọọlụ mpịachi nke atọ dị mfe na nhazi, obere nha na ìhè dị arọ.Ọ nwere arụmọrụ mkpuchi dị mma ma ejiri ya mee ihe na sistemu agụụ.Mgbe ị jikọtara ya na ọkpọkọ, gbanye ya na ike a kapịrị ọnụ.

Nkọwa nka nka:

Ihe onwunwe: SS304, SS316L

Nha: ọkọlọtọ DIN: DN15-DN100

ọkọlọtọ ISO: 3/4" - 4"

Ụkpụrụ na-arụ ọrụ: valvụ mkpọ mkpọ mmiri nke ịdị ọcha na-eji bọl ahụ na-atụgharị gburugburu axis nke valvụ ahụ iji nweta nzube nke imeghe na imechi.A na-ejikarị ya ebipụ mgbasa nke usoro na pipeline.

Ụdị njikọ bụ: eri, flange, ịgbado ọkụ, njikọ ngwa ngwa, wdg.

Ngwa: Pụrụ iche eji dị iche iche ulo oru ubi nke ukwuu corrosive media.

Nha	d1	d2	K	L	H2	S
3/4"	15.9	19.1	25.4	105	53	128
1”	22.2	25.4	50.5	115	58	165
1-1/4”	28.6	31.8	50.5	125	63	165
1-1/2”	34.9	38.1	50.5	140	70	175
2”	50.8	47.6	64	160	80	215
2-1/2”	63.5	59.5	77.5	175	87.5	215
3”	76.2	72.2	91	210	105	280
3-1/2”	85	81	106	220	110	280
4”	101.6	97.6	119	240	125	295

 

Sanitary Flange Ball Valve

Ụkpụrụ na-arụ ọrụ: A na-ejikarị valvụ bọọlụ a na-ebipụ mgbasa nke usoro na pipeline.Ọ chọrọ ọrụ ntụgharị dị nro yana obere ntụgharị iji mechie nke ọma.Dịka usoro ịkwọ ụgbọala si dị, enwere ike kewaa ya na valvụ bọọlụ ntuziaka, valvụ bọọlụ pneumatic, valvụ bọọlụ eletrik na valvụ njikwa nha eletrik.

A na-eji ya eme ihe na: nri, ihe ọṅụṅụ, kemikal na ubi ndị ọzọ.

Uru nke valvụ a:

Njikọ flange na-eme ka ọdịdị valvụ ụlọ ọrụ gara aga dịkwuo mma, na-eji ígwè egweri eme ihe, na ọgwụgwọ elu na-enweta elu dị ọcha n'ime na n'èzí, nke na-emeju uru nke ọkwa nri na ọkwa mmepụta ihe.N'ezie dozie ahụmịhe akụrụngwa nke ụlọ ọrụ dị iche iche gbasara akụrụngwa.

Nha	d	D	L	H	S
DN15	16	100	100	60	120
DN25	28	110	130	85	150
DN32	35	130	140	95	150
DN40	42	140	150	108	165
DN50	50	160	164	115	165
DNA65	66	180	190	128	220
DN80	80	200	210	146	240
DN100	100	220	240	190	240