Other Valves
-
Power Station Attemperating Water Control Valve
With wide internal multistage throttling, cage type throttling sleeve is matched with needle type wide core, which can withstand large differential pressure. The adjusting seat is pressed and sealed independently, and the conical sealing surface is reliable. It can be matched with the non-equilibrium adjusting core to achieve zero leakage.
-
Customized Corrosion-Resistant Acid And Alkali-Resistant Cast Steel Breathing & Pressure Relief Valve
1. It can avoid the loss of the tank due to overpressure or negative pressure, and can recover the “breathing” of the tank evaporation loss of.
2.Functional structures such as flame arrester and jacket can be added according to user requirements. -
Pipe Discharge Breathing Valve
It can avoid the loss of the tank due to overpressure or negative pressure, and can recover the “breathing” of the tank evaporation.
-
Atmospheric Discharge Breathing Valve
It can avoid the loss of the tank due to overpressure or negative pressure, and can recover the “breathing” of the tank evaporation.
-
Forged High Pressure High Temperature Resistant Steel Valves
Multi direction die forging refers to the forging with complex shape, without burr, small multi branch or with cavity, which is obtained by using combined die, once heating and once stroke of the press. Moreover, there is a very high requirement for the tonnage of forging press. In the past, due to the large size of the large diameter adjusting body, it can only be made by dividing silver and then assembled and welded together. If multi-directional die forging is used, not only the shape can be directly forged in one heat, but also the inner cavity can be forged together, greatly improving the strength and aesthetics of the blank in the fiber direction, and reducing the product cost.
-
High Temperature Sanitary Diaphragm Valve
8873 8Z Manual Diaphragm Valve DN Drive Mode Working Pressure Control Method Valve Structure Diaphragm Material 4↓ 15 Plastic handwheel with closed stop and mechanical position display EPDM 0-10bar PTFE 0-6bar Manual 2/2-way valve body, T-shaped valve body, multi-port valve, tank bottom valve PTFE/EPDM EPDM FPM 8873 10Z Manual Diaphragm Valve DN Drive Mode Working Pressure Control Method Valve Structure Diaphragm Material 10↓ 20 Plastic handw... -
B600 GMP/SAP Valve Structure
The tank bottom valve is welded at the bottom of the container, so as to achieve the best effect of emptying, cleaning and disinfection. In addition, the working medium can be well mixed according to the various technological requirements in the operation process. It is important that the sealing ridge of the tank bottom valve is already as close as possible to the bottom wall of the tank so as to achieve zero dead space effect.
-
Clamp interface
Standardized Design
All clamp connections are machined according to the standard dimensions of the interface (eg: DIN 11850, SMS 3008 or ASME BPE), and we comply with the corresponding standards required by customers.
-
Flame Arrester
It is installed in the pipe end or in the pipeline near the pipe end or in the tank head, which is of deflagration and detonation resistance type. It can prevent the flame from spreading at subsonic speed.
-
Atmospheric Discharge Pressure Relief Valve
It can avoid the loss of the tank due to overpressure or negative pressure, and can recover the “breathing” of the tank evaporation.
-
Pipe Discharge Pressure Relief Valve
Functional structures such as flame arrester and jacket can be added according to user requirements.
-
Single Suction Valve
It can avoid the loss of the tank due to overpressure or negative pressure, and can recover the “breathing” of the tank evaporation.