Globe Valves
-
High Quality Steel Casting Power Station Globe Valve
The sealing surface of the hole seat and the access panel is made of cobalt base hard alloy by surfacing welding or plasma spray welding, with high temperature resistance, wear resistance and scratch resistance.
-
Stainless Steel Precision Casting/investment Casting Globe Valve
In the open state, there is no longer any contact between the valve seat and the disc seal, so there is less mechanical wear on the sealing surface. Since the seat and disc of most globe valves are easier to repair or replace the seals without removing the entire valve from the pipeline, it is suitable for the occasion where the valve and the pipeline are welded together. When the medium passes through this type of valve, the flow direction is changed, so the flow resistance of the globe valve is higher than that of other valves.
-
Petroleum & Petrochemical Natural Gas Globe Valve
As an extremely important globe valve, the sealing of the globe valve is to apply torque to the valve stem, and the valve stem applies pressure to the regulating handle in the axial direction to make the valve loose sealing surface closely fit with the sealing surface of the valve seat and prevent the medium from leaking along the gap between the sealing surfaces.
-
Lined Diaphragm Globe Valve
Short stroke, forced seal.
-
Nickel Base Alloy High Pressure&Temperature Globe Valve
In order to ensure the safety and reliability of the valve, the valve body is made of nickel base alloy material, which is made of overall silver or reported and welded. Due to the influence of structural factors, the cut-off adjustment is subject to large discharge and high pressure drop.
-
GB Globe Valve
As an extremely important globe valve, the sealing of the globe valve is to apply torque to the valve stem, and the valve stem applies pressure to the regulating handle in the axial direction to make the valve loose sealing surface closely fit with the sealing surface of the valve seat and prevent the medium from leaking along the gap between the sealing surfaces.
-
ANSI Globe Valve
As an extremely important globe valve, the sealing of the globe valve is to apply torque to the wide rod, which exerts pressure on the pin in the axial direction to make the regulating sealing surface closely fit with the regulating seat sealing surface, and the sealing medium is along the sealing surface to stop leak from the gap between them.