Valves
-
GB Soft Sealing Ball Valve-Fixed Ball Valve
Medium and low pressure, small diameter fixed ball adjustment, trunnion type.High pressure, large diameter fixed ball adjustment with support plate.
-
GB Soft Sealing Ball Valve-Floating Ball Valve
With the elastic seat adjusting structure design, the contact area between the valve seat and the ball will change with the medium pressure, so that the sealing pressure can be adjusted as required to ensure reliable sealing and switch torque low.
-
GB Swing Check Valve
The function of this swing check valve is to allow the medium to flow in one direction only, and to stop the flow in the opposite direction. Usually, the valve works automatically. Under the action of fluid pressure flowing in one direction, the valve clack opens. When the fluid flows in the opposite direction, the adjusting tank acts on the adjusting seat by the fluid pressure and the weight of the adjusting flap to cut off the flow.
-
GB Lifting Check Valve
The function of this lifting check valve is to allow the medium to flow in one direction only, and to stop the flow in the opposite direction. Usually, the valve works automatically. Under the action of fluid pressure flowing in one direction, the valve clack opens. When the fluid flows in the opposite direction, the adjusting tank acts on the adjusting seat by the fluid pressure and the weight of the adjusting flap to cut off the flow.
-
GB Globe Valve
As an extremely important globe valve, the sealing of the globe valve is to apply torque to the valve stem, and the valve stem applies pressure to the regulating handle in the axial direction to make the valve loose sealing surface closely fit with the sealing surface of the valve seat and prevent the medium from leaking along the gap between the sealing surfaces.
-
GB Gate Valve
Gate valve refers to the control valve whose closing piece (gate) moves in the vertical direction along the centerline of the passage. In the pipeline, the brake regulator can only be used for full opening and full closing, and cannot be used for regulation and throttling.
-
Forged Square Ball Valve
It is widely used in various industries such as chemical industry, electromechanical engineering, machinery manufacturing, shipbuilding, electric power, petrochemical, metallurgy, plumbing, water treatment, mechanical equipment manufacturing, pneumatic pipelines, hydraulic pipelines, etc.
-
-
ANSI Globe Valve
As an extremely important globe valve, the sealing of the globe valve is to apply torque to the wide rod, which exerts pressure on the pin in the axial direction to make the regulating sealing surface closely fit with the regulating seat sealing surface, and the sealing medium is along the sealing surface to stop leak from the gap between them.
-
Power Station Steam Ball Valve (One-piece)
Under some special working conditions (such as the drain valve of the main steam pipe, which is also responsible for the discharge of steam from the startup heat pipe in addition to the drainage), due to the high flow rate and large impact force, the ball in the ceramic cavity will produce high-frequency reciprocating vibration to impact the valve rod.
-
Customized Chemical Control Valves For Power Plants And Pharmaceutical Plants
The single seat control valve is a top guide structure control valve. The free body structure is tight, and the flow is S-streamline channel. It has small pressure loss, large flow, wide adjustable range, high flow characteristic accuracy, and good vibration resistance. The regulating valve can be equipped with multi spring diaphragm actuator, with large output force. Suitable for controlling fluids and high viscosity media with different pressures and temperatures.