Valves
-
Petroleum & Petrochemical Butterfly Valve
The electrical control system adopts PLC intelligent control, which greatly simplifies the electrical circuit and has strong fault self diagnosis function. It can be controlled locally and remotely, and connected to the central control room and hydraulic turbine dynamic control, high degree of automation, safety and reliability, is the ideal equipment to realize the management concept of “few people on duty, no one on duty” of hydropower station.
-
Petroleum&Petrochemical Fluorine lined Check Valve
The valve is connected by a pair of clamps, and the structure is tight. Because of the short closing stroke and spring yellow loading, the closing speed is fast, which can significantly reduce the water hammer phenomenon. The valve has the characteristics of small volume, light weight, sensitive action, reliable sealing, convenient installation, etc. It can be installed horizontally or vertically.
-
Petroleum & Petrochemical Check Valve
The function of this swing check valve is to allow the medium to flow in one direction only, and to stop the flow in the opposite direction. Usually, the valve works automatically. Under the action of fluid pressure flowing in one direction, the valve clack opens. When the fluid flows in the opposite direction, the adjusting tank acts on the adjusting seat by the fluid pressure and the weight of the adjusting flap to cut off the flow.
-
High Quality Steel Casting Power Station Check Valve
The air discharge stop callback is installed on the outlet pipe of the high pressure feed pump of the thermal power unit to prevent the backflow of the feed water and protect the feed pump. This regulation works automatically with the minimum flow of the water pump and the loop bypass.
-
Stainless Steel Precision Casting/Investment Casting Ball
The ball is divided into two categories: soft seal and hard seal. Models are: two-way ball, three-way ball, curved ball, fixed ball, etc., and various non-standard balls can be customized for users. The blanks are forged, cast and coil welded. Materials available are: 304, 304L, 316, 316L, etc.
-
High Temperature Sanitary Diaphragm Valve
8873 8Z Manual Diaphragm Valve DN Drive Mode Working Pressure Control Method Valve Structure Diaphragm Material 4↓ 15 Plastic handwheel with closed stop and mechanical position display EPDM 0-10bar PTFE 0-6bar Manual 2/2-way valve body, T-shaped valve body, multi-port valve, tank bottom valve PTFE/EPDM EPDM FPM 8873 10Z Manual Diaphragm Valve DN Drive Mode Working Pressure Control Method Valve Structure Diaphragm Material 10↓ 20 Plastic handw... -
B600 GMP/SAP Valve Structure
The tank bottom valve is welded at the bottom of the container, so as to achieve the best effect of emptying, cleaning and disinfection. In addition, the working medium can be well mixed according to the various technological requirements in the operation process. It is important that the sealing ridge of the tank bottom valve is already as close as possible to the bottom wall of the tank so as to achieve zero dead space effect.
-
Clamp interface
Standardized Design
All clamp connections are machined according to the standard dimensions of the interface (eg: DIN 11850, SMS 3008 or ASME BPE), and we comply with the corresponding standards required by customers.
-
Sanitary Pneumatic Three-piece Butterfly Valve
Dimension Pneumatic Three-piece DIN DN A B L H Series 1 Series 2 DN20 22 23 1.5 100 223 DN25 28 29 1.5 88 225 DN32 34 35 1.5 92 228 DN40 40 41 1.5 92 232 DN50 52 53 1.5 92 240 DN65 70 2.0 94 250 DN80 85 2.0 104 257 ... -
Sanitary Pneumatic Threaded Butterfly Valve
Dimension Pneumatic Threaded SMS Size A B L H SMS25 22.5 RD40×1/6” 66 225 SMS32 35.5 RD60×1/6” 72 228 SMS51 48.5 RD70×1/6” 76 240 SMS63.5 60.5 RD85×1/6” 80 250 SMS76 72.9 RD98×1/4” 80 257 SMS101.6 97.6 RD125×1/4” 94 267 Pneumatic Thre... -
Sanitary Manual Threaded Butterfly Valve
Dimension Manual Threaded DIN DN A B L H DN20 20 RD44×1/6” 66 120 DN25 26 RD52×1/6” 66 120 DN32 32 RD58×1/6” 66 125 DN40 38 RD65×1/6” 68 130 DN50 50 RD78×1/6” 70 150 DN65 66 RD95×1/6” 72 170 DN80 81 RD110×1/4” 92 ... -
Sanitary Manual Three-piece Butterfly Valve
Dimension Manual Three-piece DIN DN S B L H Series 1 Series 2 DN25 1.5 28 29 100 120 DN32 1.5 34 35 100 125 DN40 1.5 40 41 100 130 DN50 1.5 52 53 110 150 DN65 2 70 114 170 DN80 2 85 130 188 DN100 2 104 ...