B600 GMP / SAP Struktur klep
Parentah pikeun Paké
The klep tank handap dilas di handapeun wadahna, ku kituna pikeun ngahontal éfék pangalusna tina ngosongkeun, beberesih sarta disinfection.Salaku tambahan, médium kerja tiasa dicampur ogé dumasar kana rupa-rupa syarat téknologi dina prosés operasi.Kadé lamping sealing tina klep handap tank geus sacaket mungkin ka témbok handap tank ku kituna pikeun ngahontal enol pangaruh spasi maot.
Fitur
——Strukturna kompak, anu tiasa mastikeun pamasangan dina rohangan anu alit.
——Teu aya sudut paéh, tiasa dikosongkeun sacara otomatis.Awak mesin tina hiji sapotong bahan (henteu aya konstruksi dilas).
- Cocog jeung prosés CIP na SIP, bisa sterilized dina suhu luhur, beungeut awak klep bisa mechanically digosok atanapi electropolished nurutkeun sarat, sarta precision bisa ngahontal 0.25um..
——Strukturna idéal boh tina segi laju aliran sareng syarat prosés, sareng moal aya aliran ngagalura nalika ngosongkeunprosés.
——Sadaya antarmuka standar internasional ayeuna tiasa disayogikeun, sapertos sambungan las, sambungan clamped atanapi sambungan benang, jsb.
——Bahan awak klep nyaéta stainless steel 1.4435 / 316L, tangtosna, alloy sanésna ogé tiasa dianggo dumasar kana syarat palanggan..
——Tangk handap awak klep bisa dilengkepan roda leungeun, sirah pneumatic atawa sirah listrik.
——Desain ring las diadopsi pikeun ngirangan kasusah las handapeun tanki.
Surface Finish
Tempat kerja anu modéren, dirarancang saé sareng profésional anu dilatih saé nyayogikeun jaminan pikeun ngolah permukaan awak klep kualitas luhur.syarat pamakéan béda bisa dihontal ku grinding, polishing, electropolishing atanapi éléktrolisis.Surface finish tina 6.3m nepi ka 0.25m.
| KlepSurfaceFinisGrade (DIN4768Standard) | Kodeu | |
| Ra≤0.6m | TPermukaan luar sareng jerona digosok sacara mékanis, sareng permukaan luarna dilapis ku manik kaca. | 1534 |
| Ra≤0.6m | Electropolishing of surfaces jero jeung luar | 1535 |
| Ra≤0.4m | Permukaan jero sareng luar digosok sacara mékanis, sareng permukaan luar dilapis ku manik kaca. | 1536 |
| Ra≤0.4m | Electropolishing of surfaces jero jeung luar | 1537 |
| Ra≤0,25m | Permukaan jero sareng luar digosok sacara mékanis, sareng permukaan luar dilapis ku manik kaca. | 1538 |
| Ra≤0,25m | Electropolishing of surfaces jero jeung luar | 1539 |
Diafragma pikeun Farmasi, Pangan sareng Biotéh
| Ukuran diafragma | Bahan | FDA | Cairan Sedeng | HighTemperaturStimSterilisasi |
| FPDM | 177.2600 | 90＜C | 150 ℃ / 40 mnt | |
| PTFE/EPDM | 177.1550/21 | 90＜C | 150 ℃ / 40 mnt | |
| EPDM | 177.2600 | 90＜C | 130 ℃ / 40 mnt | |
| PTFE/EPDM | 177.1550/21 | 90＜C | 150 ℃ / 40 mnt | |
| PTFE/EPDM | 177.1550/21 | 90＜C | 150 ℃ / 60 mnt | |
| PTFE | 177.1550/21 | 90＜C | 160 ℃ / 60 mnt | |
| EPDM | 177.2600 | 90＜C | 130 ℃ / 40 mnt |
Diafragma
| Klep Modél | MA | ISO | ASME-BPE | A | B | LK | x | y | dm | ||||
|
|
| DN (mm) | ID (mm) | Kv (m³ / h) | DN (mm) | ID (mm) | Kv (m³ / h) |
|
|
|
|
|
|
| 8873,8850 | 8 | 4 |
|
| 4 |
|
| 22 | 22 | - | 32 | 32 | - |
| 8 | 6 |
|
| 6 |
|
| |||||||
| 8 | 8 | 10, 3 | 2, 4 | 8 | 4, 57 | 0, 7 | |||||||
| 8 | 10 |
|
| 10 | 7, 75 | 1, 4 | |||||||
| 8 | 15 |
|
| 15 | 9, 40 | 2, 0 | |||||||
| 8873,8850 | 10 | 10 | 14, 0 | 3, 9 | 10 | 7, 75 | 1, 4 | 39 | 44 | - | 50 | 55 | - |
| 10 | 15 | 18, 1 | 5, 3 | 15 | 9, 40 | 2, 2 | |||||||
| 8873,8850 | 25 | 15 | 18,1 | 11 | 15 | 9, 40 | 2, 2 | 54 | 46 | - | 74 | 68 | - |
| 25 | 20 | 23, 7 | 12, 5 | 20 | 15, 75 | 6, 8 | |||||||
| 25 | 25 | 29, 6 | 21, 0 | 25 | 22, 1 | 11, 5 | |||||||
| 8873,8850 | 40 | 32 | 38, 4 | 43, 0 |
|
|
| 70 | 65 | - | 102 | 92 | - |
| 40 | 40 | 44, 3 | 50, 0 | 40 | 34, 8 | 40, 0 | |||||||
| 8873,8850 | 50 | 50 | 56, 3 | 64, 0 | 50 | 47, 5 | 48, 0 | 82 | 78 | - | 125 | 110 | - |
| 8873,8850 | 80 | 65 | 72, 1 | 95, 0 | 65 | 60, 2 | 85, 0 | 127 | 114 | - | 192 | 162 | - |
| 80 | 80 | 84, 3 | 127, 0 | 80 | 72, 9 | 110, 0 | |||||||
| 8873,8850 | 100 | 100 | 109, 7 | 205, 0 | 100 | 97, 4 | 185, 0 | - | - | 194 | - | - | 234 |
Diafragma
